Air View binoculars

Barska Sport Optics & Security Products
Gear Guides, Reviews & News

Top Opening Biometric Drawer Safe by Barska

Barska Biometric Drawer SafeThe new quick access biometric top opening drawer safe by Barska® features a new dual hydraulic pressurized hinge system. Barska biometric safes are well known for their quick access fingerprint scanning optical technology. This new dual hydraulic hinge allows for quick secure access to your valuables. The reinforced motorized dead bolt safe door can be effortlessly opened with one finger. The dual pressurized hydraulics insure that the solid safe door wont slam shut on your fingers. This standard size drawer safe is a perfect fit for your dresser drawer at home and in your office desk at work. Not limited to being stored away in a drawer the Barska top access safe can be mounted to any flat surface.
Need to give access to multiple users? The Barska quick access biometric drawer safe can store up to 30 different fingerprints. In an office environment you may need to have a few top level managers have access to important documents, petty cash and incase of emergency a handgun for protection. At home keeping your valuables in a secure space is a must, but in a home with young children keeping firearms in a safe place is the law. You can grant access to only the adults in your family to ensure your children dont access your firearms. Careless access to your firearms can have dangerous consequences, be a reasonable handgun owner with Barska’s new top access safe.
When it comes to home defense quick access to your firearms will keep you well protected but many handgun owners dont keep a gun at their side when at home and many break-ins happen at night. When awakened by an intruder in the middle of the night the last thing you want to do is look around for your safe keys in the dark or remember a complex combination. With the Barska biometric safe you can go directly to your firearms and have access to them in three seconds with the simple scan of your finger.

Programing the Barska Biometric Safe to Store a Fingerprint
All new Barska Biometric Safes will be in demo mode when you first put in the 4 AA batteries (included). This means that any action of scanning a finger will open the safe. You will need to program your fingerprint into the system to lock the safe.
Quick Start Guide: Make sure you have installed batteries into the safe.

  1. Push and release the programing button on the inside of the safe, you will hear one beep.
  2. Then place and hold your finger on the optical sensor to be scanned
  3. Hold your finger on the optical sensor until you hear two more beeps which signal that your fingerprint has been stored successfully. Fingerprint programming is now complete.
  4. To add more fingerprints simply repeat steps 1 – 3.

Helpful Note:
You may want to scan multiple fingers into the safe system incase you forget which finger you have stored. Also over time your fingerprints may get damaged do to cuts or burns. If you have had an injury to your finger you may want to rescan your fingerprint after it has fully healed.

Back-Up / Secondary Access
The Barska biometric safe comes with two back up keys . The back up keys can be used only by removing the barska logo plate with an allen wrench.

Battery Life & Power Usage
The Barska biometric drawer safe uses very little power and can last up to two years on 4 AA batteries which are included.

For More information Visit Barska Biometric Drawer Safe

Read more…

How To Use A Rifle Scope Bore Sighter Kit by Barska

Barska Bore Sighter Kit
Barska Bore Sighter Kit

Bore Sighting your riflescope with your rifle will allow you to quickly and more accurately “zero in” or “sight in” your riflescope to the correct shooting distance. You will always need to shoot a test group of shots after you bore sight your riflescope to your rifle. Bore sighting your riflescope will reduce wasting ammunition when targeting in your rifle during test shooting.

Example Problem: You have a newly mounted zoom power riflescope on a rifle and aim at a target 100 yards away. You aim for the center of the target with the scope and fire for the first time, but you see no impact on the target in the view of the scope. If you where not able to see were the bullet actually landed then you would need to guess how you need to adjust the scopes windage and elevation on the next shot. You would need to continue shooting multiple test shots and adjusting the scope until the actual impact of the bullet comes into view of the scope. This will waste time and ammunition.

Why Does this Happen? A newly mounted riflescope’s actual zero point on a rifle is unknown due to many variables; type of scope base, height of mounting rings, type of rifle, type of ammunition, etc.

Solution: The Barska® Bore Sighter Kit will allow you to sight your riflescope with your rifle so that when test firing you will only have to make very fine adjustments and waste very little ammunition.

Firearm Safety Warning: Secure your rifle to a suitable support that will allow you to safely work on the rifle. Always make sure your rifle is unloaded and the chamber is clear. Make sure the rifles safety is on. The bore sighting procedure requires no shooting or bullets. Always handle a firearm as if it where loaded. When bore sighting your rifle always have the rifle pointed in a safe direction.

Note: To ensure the best performance make sure your riflescope is mounted correctly using scope rings and a rifle base designed for your scope and rifle.

1. Attach The bore sighter To Firearm Muzzle Select the appropriate bore arbor from the kit by selecting caliber indicated next to each arbor and insert the end of the arbor with brass hinge into the bore sighter. Hand tighten the locking screw to attach firmly the bore sighter (Fig. 1 and 2) Insert the other end of the stud into the muzzle (Fig. 3).

Read more…

Biometric Rifle Safe By Barska®

Biometric Rifle Safe by BARSKA
Biometric Rifle Safe by BARSKA

The all new Biometric rifle safe by Barska® is the ultimate secure quick access rifle storage system. The advanced biometric fingerprint recognition technology allows for fast secure access to your firearms with the simple scan of a fingerprint. Push the power button and hold your finger on the laser optics sensor to quickly open the safe in three seconds. The biometric safes scanning technology is the solution to securely storing your rifles and having instant access to them incase of an emergency. No longer will you need to search for your keys or have to remember complex numerical key combinations. The new biometric rifle safe by Barska® is the safe of the future today.

Securely store up-to four long rifles and with the removable storage shelve you can also store ammunition, and hand guns. A removable four section rifle safe barrel holder will keep your rifles lined up and ready for action. Weighing in at 66 lbs the Barska rifle safe will detour any would-be thief  from taking off with your valuables. For added security the biometric rifle safe is manufactured with six mounting points at the back of the safes and includes mounting hardware. Out of the box you will be able to securely attach the Barska rifle safe to a wall,  the floor or solid flat surface.

The three point dead-bolt locking system and solid steel construction guarantee peace of  mind that no unauthorized users will access your valuables. The Barska biometric finger scanning optical sensor is extremely energy efficient lasting up to two years on only 4 AA batteries (included). With more then 2.5 cubic feet of storage space you will be able to store much more than rifles. Keep your firearms secure and quickly accessible with Barska’s biometric rifle safe.

Read more…